Tips on door and window maintenance
Cleaning and maintenance are very important in home life, and door and window maintenance is one of them. Although doors and windows are small, they are still important because we use them frequently. So what are the precautions for door and window maintenance and cleaning? Are there any taboos? How can we make our doors and windows last longer? Next, I will introduce seven tips on door and window maintenance.
1. Door and window frame wall joint
One point of door and window maintenance is that you need to check the high-end door and window frame wall joints frequently. If there is looseness, it is very easy to deform the frame, making the door and window unable to close and seal. Therefore, if the screws at the connection are loose, they should be tightened immediately. If the screw base is loose, epoxy superglue should be used to mix a small amount of cement to seal it.
2. Keep the door frame clean
When using aluminum doors and windows, the action should be light, and push and pull naturally; if you find any difficulties, do not push and pull hard, and you should eliminate the fault first. Dust accumulation and deformation are the main reasons for the difficulty of pushing and pulling aluminum alloy doors and windows. The first thing to do in door and window maintenance is to keep the door frame clean, especially the cleaning of the push and pull groove. A vacuum cleaner can remove the dust in the groove and the door seal strips.
3. The connection parts of the door and window frames
The connection parts of the door and window frames should be checked frequently, the bolts should be tightened in time, and the damaged parts should be replaced. The vulnerable parts of aluminum alloy doors and windows, such as the positioning shaft pins, wind braces, and floor springs, should be checked frequently and lubricated regularly to keep them clean and flexible.
4. Dry them in time after the rain
It should be noted that after the rain, the wet glass and door and window frames should be wiped dry when maintaining doors and windows.
5. Sealing strips and glass glue
Sealing strips and glass glue are the key structures to ensure the sealing and insulation of aluminum doors and windows. If they fall off, they should be repaired and replaced in time.
6. Clean with a soft cloth and clean water
Aluminum doors and windows can be cleaned with a soft cloth and clean water or neutral detergent. Do not use ordinary soap and washing powder, let alone strong acid and alkali cleaners such as scouring powder and toilet cleaning essence, which will corrode the surface of the profile.
7. Do not step on the aluminum frame
When cleaning aluminum doors and windows, do not step on the aluminum frame or hold the frame for support. This can easily wear out the doors and windows or cause accidents.