What are the advantages of thermally insulated broken bridge aluminum doors and windows?
Insulation bridge-cut aluminum is also called bridge-cut aluminum, insulation aluminum, and bridge-cut aluminum alloy.
Advantages of thermally insulated bridge aluminum:
1. The two sides of the heat-insulating bridge partition are aluminum profiles, and a plastic profile cavity is used in the middle to isolate the thermal data. This solution combines the advantages of plastic and aluminum alloy materials to meet various needs for decoration, door and window strength, and aging resistance.
2. The thermal insulation bridge partition aluminum-plastic profile can complete the three-sealing layout of doors and windows, reasonably separate the water vapor chamber, successfully complete the isobaric balance of air and water, and significantly improve the water and air tightness of doors and windows.
3. The air tightness of insulated bridge partition aluminum doors and windows is better than that of any aluminum or plastic windows, which can ensure that indoor window sills and floors in areas with strong winds and dust are dust-free; it can ensure that 50 residents on both sides of the highway are not disturbed by noise.
Features of thermal insulation bridge partition aluminum profiles:
(1) Broken bridge aluminum alloy doors and windows are currently the most advanced aluminum alloy doors and windows and are the iron bars of the second wooden window prison. The fifth generation of new thermal insulation and energy-saving doors and windows follows plastic steel doors and windows and usually colorful aluminum alloy doors and windows. Its appearance can be painted in various colors.
(2) The composition and arrangement of bridge-broken colored aluminum alloy doors and windows are related to the environmental protection of wooden and iron windows. The commonality of the sturdiness and safety of steel windows and the insulation and energy-saving of plastic steel doors and windows is that the energy-saving insulation strips are composed of two different profiles. Energy-saving insulation strips are also called nylon strips. Their main function is to disconnect the heat exchange center and avoid rapid or slow heat exchange between hot and cold. Its layout is messier than ordinary aluminum doors and windows, and the cost is higher. Generally, colored aluminum does not have thermal insulation strips, so it does not retain heat and is not energy-saving. It just sticks to the surface.
(3) The profile section wall thickness of bridge partition aluminum alloy doors and windows should strictly comply with national standards. The wall thickness is required to be greater than 1.4mm. Because wall thickness is related to the assembly skills and solid safety of doors and windows. Generally, the wall thickness requirements for colored aluminum doors and windows are not too strict. It is usually determined based on the interests of the market and the processing of doors and windows and is usually at the mercy of 1.0mm.
(4) The assembly skill requirements of bridge-broken aluminum doors and windows and commonly used color aluminum doors and windows: bridge-broken color aluminum doors and windows are cut into 45-degree angles with a wall thickness of more than 1.4mm and doors and windows with a wall thickness of more than 3mm are assembled into angles with a complete set of equipment through special plug-ins. Kneading and positioning, while doors and windows are generally connected with 1mm angle aluminum and rivets, which are strong and unsafe, but low cost. There is no doubt that the assembled colorful broken bridge aluminum doors and windows can allow adults to stand on the ground and walk around. There is a big difference in skills between complete equipment assembly and on-site manual assembly. Special bridge-cut aluminum profiles cannot be compared with ordinary aluminum profiles.
(5) The bridge-shaped aluminum doors and windows need to be customized by the professional production cycle of the aluminum manufacturer. Its appearance color processing is professional and skillful, and its application period is permanent. But usually, colored aluminum doors and windows are made of any kind of aluminum and are only painted with their own color without professional treatment. The technical processing of aluminum manufacturers is not professional enough, so the coating effect and application period will not be very good. If it takes too long, fading will occur. This is the so-called cowhide gland. Then we decided that the bridge was broken. Colored aluminum doors and windows have a longer production cycle, while colored aluminum doors and windows usually have a shorter production cycle.