What should be paid attention to when installing thermally broken aluminum doors and windows?
When making and installing thermally broken aluminum doors and windows, a variety of adhesive strips are usually used to seal them to ensure good thermal insulation performance of the product, etc., so how many adhesive strips are used for thermally broken aluminum windows?
1. How many adhesive strips are used for thermally-broken aluminum doors and windows
Generally, four kinds of adhesive strips are needed to make thermally broken aluminum doors and windows, namely, glass inner and outer, middle and edge adhesive strips. When choosing to install thermally broken aluminum doors and windows, you should pay attention to the quality of doors and windows and accessories, pay attention to whether the glass adhesive strips of doors and windows are tightly sealed, etc., and try to avoid problems such as water leakage and poor sound insulation of doors and windows.
2. What should be paid attention to when installing thermally broken aluminum doors and windows
1. When installing thermally broken aluminum doors and windows, you must first determine the installation quantity and location of the embedded parts of doors and windows, and paint the fasteners with anti-corrosion and waterproof materials to avoid the embedded fasteners from rusting and affecting the stability of doors and windows. Before installing doors and windows, we also need to do relevant preparations. For example, we need to check whether the doors and windows have any bruises, whether the window glass is damaged, whether there are uneven places on the window frame, etc.
2. When installing the thermally broken aluminum doors and windows, we must ask professional and experienced construction workers to carry out the construction. If you are replacing new doors and windows, do not remove the old doors and windows too violently to avoid cracks on the window sills and exterior walls. When installing doors and windows, the upper window frame is usually fixed first, and then the lower and side window frames are fixed in turn. During the installation process, expansion screws are usually used to fix them every 50 cm.
3. When installing thermally-broken aluminum doors and windows, we must pay attention to the sealing of doors and windows. After the doors and windows are installed, there will be gaps between the doors and windows and the wall. You can use foam glue to seal and fill them. After the doors and windows are installed, we can also shake the windows to see if they are installed firmly, and check whether the glass, and window frames, and the window frames and walls are sealed well, etc.